INTACS Industrial Training | Siemens Training

Siemens training courses for 2010

Listening to you (3 day courses) Because of shift constraints, some companies find it difficult to release people to attend 5 day courses. Also, some delegates feel that a 5 day PLC course is too demanding & as a result they do not get the most from the training. As a response to this request, we have introduced an alternative structure based around 3 day PLC courses. These courses have proved to be very popular & we will continue with them through 2010. A £100 discount is available if you book two 3 day S5 courses or two 3 day S7 courses for the same delegate.

*Siemens S7-300/400 PLC courses*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
S7-300/400 Basic M&T		5 days	£980		22	1	19		7	12		13	18		6
S7-300/400 Intermediate M&T		5 days		We recommend the 3 day Networked Systems & 3 day Understanding S7 Programs courses
Siemens S7-300/400 PLC Programming		5 days	£995	Dates available on request
S7-300/400 PLC with C7 Basic M&T		5 days	£1080		1	1	19		7	12		13	18		6
S7-300/400 Basic M&T (BLACKBURN venue)		5 days	£1085	Dates available on request
Get started with IEC 611-31 PLC Programming		2 days	£480		25		15	27		29		30			2

*Siemens S7-300/400 - NEW 3 DAY COURSES*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
NEW	Siemens S7 First-line Maintenance	3 days	£770		22	1	19		7	12		13	18		6
NEW	Siemens S7 Troubleshooting	3 days	£770		15	29		17		5		20		8
NEW	Siemens S7 Networked Systems	3 days	£770			8	7		2		2		4		13
NEW	Understanding Siemens S7 Programs	3 days	£770		22		12	24		26		27		29
Book two 3 day S7 courses for the same person & SAVE £100

*Siemens S7-200 PLC Basic M&T course*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
S7-200 Basic M&T		3 days	£690		17			19			16			29

*Siemens S5 PLC Basic M&T courses*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
S5 Basic M&T		5 days	£980		1	22		10	28		9	20		15
S5 Intermediate M&T		5 days	£995	For 2010 we recommend the 3 day Understanding S5 Programs course

*Siemens S5 - NEW 3 DAY COURSES*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
NEW	Siemens S5 First-line Maintenance	3 days	£770		1	22		10	28		9	20		15
NEW	Siemens S5 Troubleshooting	3 days	£770		15	29		17		5		20		8
NEW	Understanding Siemens S5 Programs	3 days	£770		22		12	24		26		27		29
Book two 3 day S5 courses for the same person & SAVE £100

*PLC* *Training Workshops*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
Siemens 2 day Workshop		2 days	£610	Dates available on request

PLC Training Workshops: Very often the demands on plant maintenance personnel are regularly pushing the boundaries of what they know & what they can safely remember. Our Workshops provide the environment & the opportunity for people to gain help & focus on the priorities of their own sites, applications & problems.

*Siemens OPs/TPs (Operator/Touch Panel) courses*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
OP/TP Maintenance with ProTool		1 day	£280	25		29			28			27			13
OP/TP Implementation with ProTool		1 day	£280	26		30			29			28			14
OP/TP/MP Maintenance with WinCC Flex		1 day	£280	27		31			30			29			15
OP/TP/MP Implementation with WinCC Flex		1 day	£280	28			1			1		30			16
Implementation course inc. configuration & screen improvements (Maintenance course is pre-requisite)
M&T = Maintenance & Troubleshooting
*Siemens Communications, Networking & Fieldbus courses*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
Working with & Troubleshooting Siemens S7 PLCs using Profibus DP		1 day	£280		1		26			19			4
Working with & Troubleshooting Siemens S7 PLCs using Ethernet		1 day	£280		2		27			20			5
Working with & Troubleshooting Siemens S7 PLCs using Interbus		2 days	£510		4		29			22			7
Working with & Troubleshooting Siemens S7 PLCs using ASi		2 days	£480		3		28			21			6
ASi Safe with Siemens S7		2 days	£560		4		29			22			7
Understanding modern PLC networks (Fieldbus terminology & basics for maintenance people)		2 days	£480	Dates available on request

*Siemens Drives & Motion Control courses*
Course type		Duration	Fee	J	F	M	A	M	J	J	A	S	O	N	D
VSDs & Soft-starts Basic Maintenance		1 day	£280	18			6			26			25
MicroMaster 420 / 440 VSD		2 days	£480	19			7			27			26
Motion Control Basic Maintenance		1 day	£280	21			9			29			28
M&T = Maintenance & Troubleshooting

VIPA PLC training

INTACS has been appointed UK Training Partner for VIPA Automation Products.

FASTER, CHEAPER & with compatible software, VIPA offer a real alternative to Siemens S7 PLC systems.

VIPA PLCs can be used on the standard Siemens S7 courses from INTACS or we can conduct a bespoke VIPA PLC course just for your people.

Specialists in industrial control systems' training & support - standard, customised & on-site options

PLCs, Drives, Industrial Electrics & process instrumentation - approved by leading manufacturers

Providing industry with high quality & meaningful training solutions at competitive prices

INTACS Industrial Training Centre
Harbo Works, Harrowden Road, Wellingborough, Northamptonshire, NN8 5BJ
England

Telephone +44 (0) 1933 440679
Fax +44 (0) 1933 229744

Course type

Course type

Course type

Course type

Course type

Course type

Course type

OP/TP Maintenance with ProTool

Course type

Working with & Troubleshooting Siemens S7 PLCs using Profibus DP

Working with & Troubleshooting Siemens S7 PLCs using Ethernet

Working with & Troubleshooting Siemens

S7 PLCs using Interbus

Working with & Troubleshooting Siemens S7 PLCs using ASi

Course type